Plug-in hydrogen power for drones & robots
H₂ RangePak
More mission. Less charging.
H₂ RangePak is a plug-in hydrogen fuel cell module that bolts onto the drones and robots you already run. Lightweight hydrogen canisters clip in and out in seconds, so your platform spends its day working, not waiting on a charger.

The problem
The battery ceiling
Every extra battery adds weight the platform has to carry, so endurance stops scaling. Missions get cut short, crews juggle spare packs and chargers, and long inspections or patrols need several sorties. Hydrogen breaks that ceiling: it stores far more energy per kilogram than lithium batteries.
Plug in
Mounting and interface kits connect RangePak to your platform's existing power bus. No airframe or chassis redesign.
Swap in seconds
Clip in a full hydrogen canister instead of waiting on a charger. Dual-canister setups let you change one while the other keeps supplying power.
Run longer
The fuel cell carries the steady load while your battery covers peaks, so missions run longer on the platform you already own.
How it works
Mount. Connect. Swap & go.

- Hydrogen canisters ×2
- Power connector
- Fuel cell module
- Mounting bracket
01
Mount
A platform-specific kit fixes the module in place.
02
Connect
Smart power management shares load with your battery.
03
Swap & go
Change a canister in seconds and get back to work.
Built for the platforms you already run

Multirotor drones
Pipeline, power-line and wind-farm inspection; mapping; public safety
Explore application
VTOL & fixed-wing
Long-range survey, border and perimeter patrol, ISR
Explore application
Quadruped robots
Site security rounds, industrial inspection, hazardous areas
Explore application
Wheeled ground robots
Logistics yards, campus security, agriculture
Explore application
Field power
Quiet off-grid power for sensors, comms and charging
Explore applicationRangePak vs. a bigger battery
| Consideration | Bigger battery | H₂ RangePak |
|---|---|---|
| Endurance | Limited by the weight of each extra pack | Scales with hydrogen carried |
| Turnaround | Charge or juggle spare packs | Swap a canister in seconds |
| Field logistics | Generators and chargers | Canister exchange or field filling |
| Signature | Quiet | Quiet, low heat, emits only water vapor |
| Your platform | Often a redesign | Keep it: plug in with a kit |
At a glance (preliminary)
- Continuous power
- 200 W – 4 kW (by model)
- Peak power
- up to ~300% with hybrid battery
- Output voltage
- 24–65 V DC
- Operating temperature
- −20 to +50 °C
- Stack life
- >2,500 h (air-cooled)
- Module mass
- on request
- Canisters
- 1–2 swappable, per platform
- Canister swap
- tool-free quick-connect
Technology partner data, not yet verified by H₂ Energy Systems. Final figures confirmed per application.
Safe, supported, trusted
- Hydrogen leak detection with automatic shutdown
- Fit check, bench test and field trial before fleet rollout
- Spares, refurbishment and support contracts
- Canister supply plan with every quote
- US production planned [confirm date]
Book a 30-minute fit check
Bring your platform's make and model, today's flight or run time, the endurance you need, and your payload. We'll tell you what RangePak can do for it, and if hydrogen isn't the right fit, we'll say so.

All performance figures are preliminary and depend on platform, payload and conditions; final figures are confirmed per application. Images are concept illustrations.
